Re: [DML] A couple of exciting new products available at DCS 06 in Pheas
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] A couple of exciting new products available at DCS 06 in Pheasant Run

I just bought the JOE COOL product at DCS.  I installed it when I 
got home yesterday afternoon.  It took about 4 minutes to do (almost 
too easy).  I haven't drove the car yet since installing, but I did 
start it up and put the AC on High, and turned the blower fan on 
high, and watched the volt gauge, just flicker when each kicked on.  
It was a drastic change to what I had been used too.  I'll post my 
opinions later on the actual driving results.  As far as the fan 
failing because of an open circuit, I would think that you would 
notice an increase in temp(from normal)and also in sound (not 
hearing both fans run),but that sort of warning would be nice.

Joe, you seemed very genuine and knowledgable when I met you at 
DCS.  Thanks.

--- In dmcnews@xxxxxxxxxxxxxxx, "joekuchan" <josephkuchan@...> wrote:
> Hi Ryan,
> No, unfortunately the module does not detect lack of draw. I 
realize that such a failure mode is possible, and it is posible to detect that, but in the interests of lower cost, smaller size, and reduced time to design (I wanted a product ready for DCS '06) I did not include such a feature.

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive