[DML] Re: Rough Idle on Cold Start
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Rough Idle on Cold Start



Check the throttle plate adjustment. The stop screw may be adjusted 
such that the plates are not completely closed or the throttle cable 
may be holding them open slightly.

Harold McElraft - 3354


--- In dmcnews@xxxxxxxxxxxxxxx, "stefandmc" <stefandmc@...> wrote:
>
> So this is what I did, I just replaced my idle speed motor with a 
> brand new one which works perfect, however on a cold start the 
engine 
> idle fluctuates from about 600 rpm to 1500rpm very violently, but I 
> adjusted the fuel mixture and the car idles perfect when warm its 
just 
> on cold start that it idles bad. I dont have any vaccuum leaks that 
I 
> know of, plus I had a mechanic check for vaccum leaks with some 
macine 
> a few months ago. So im not sure what to check. Any ideas?
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive