Re: [DML] speedo cable lube
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] speedo cable lube

I was able to lube the angle drive with the wheels on the ground by 
turning the steering wheel hard right and going at it from the rear. 
Seemed to disconnect, flip over, and reattach fine. Only took a 
couple of minutes. Did I miss something?


--- In dmcnews@xxxxxxxxxxxxxxx, "Dave Sontos" <dsontos@...> wrote:
> The angle drive requires the removal of the left front wheel and
> disconnecting the speedo from it. Then rotate the angle drive so 
the little
> screw is facing up. Remove  the screw and using a standard pump 
action oil
> can squirt some oil in the screw hole. Replace the screw, rotate 
the angle
> drive back into position, reattach the speedo and front wheel and 
your good
> for another 3,000 miles.
> Dave Sontos

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive