[DML] luggage rack
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] luggage rack



Today I installed the luggage rack and I have to say that the 
installation went smoothly. As advised on here to read the directions 
twice; measure and drill only once.  Great advice.  I did run into a 
problem though.. When I cut the bottom of the rubber that the louvers 
sit on the hinges would not work.  Cutting it as instructed the layer 
over the top was too thick to allow the hinge to open and lay flat so 
the luggage rack can be mounted.  I just ended up cutting the rubber 
around each lugage rack mounting hinge and it works fine.  What did I 
do wrong?  Thanks, 
Roy
0893







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive