Re: [DML] Won't start cold
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Won't start cold



You may want to check and readjust your CO setting. I know on my car just a
minute turn on the CO setting is the difference of starting and not starting
when cold and sometimes even when hot. Try setting the CO a little more
richer.

Dave Sontos
vin 02573

----- Original Message ----- 
From: "edherrmann" <edherrmann@xxxxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Friday, April 14, 2006 7:59 PM
Subject: [DML] Won't start cold


> Car just cranks and won't start. Fuel pump works, fuel injectors are
> spraying, accumulator just replaced and holding pressure at the air
> sensor plate, checked spark plugs for spark, cold sart valve spraying
> when cranked, thermo time switch just replaced and air sensor plate
> adjusted for rich and lean setting at each crank. Also checked fuses
> and safty switch under drivers side. Can't figure out why it won't
> start. Any suggestions. Thanks  ED







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive