[DML] Thead/fitting size..
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Thead/fitting size..

I am trying to find something to convert the fuel
lines on the body to a hose barb.

Does anyone know what the thread and fitting type are?

I need a barb to screw on to Part 106993.  The banjo
fitting is NOT part of the hose, so I took the hose
off and want to put a barb on it.  The thread looks to
be some strange metric size, but it also needs to have
the proper angle in the fitting to seal the pressure. 
Maybe inverted flare?

I also need a barb to screw on to part 106994 on the
return line.

.... My alternate is to find a beat-up fuel line and
cut it up, but I have not had much luck getting a "fit
to cut up" engine wire harness either!

Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive