Re: [DML] Replacing lower ball joints
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Replacing lower ball joints



Elvis,

No problem on the picture, I'm documenting everything I'm doing to the 
car.

This work was completed over a year ago, so I have to rely on memory 
about the collar thickness. I think it was something like 1/4" (~6.4 
mm).

The collar does not affect in the installation depth of the ball 
joint. You will have the same amount of space available to install the 
clip.

-Brian
VIN# 4494

--- In dmcnews@xxxxxxxxxxxxxxx, "Elvis Nocita" <elvisnocita@...> wrote:
>
> Hey Brian, thank you.
> 
> how thick is such a collar ?
> If you still want to install the clip on top of the balljoint,
> then it can be only less than a millimeter ?!?
> 
> Elvis
> 
> 
> 
<SNIP>







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive