Re: [DML] Replacing lower ball joints
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Replacing lower ball joints



Elvis,

I don't have a picture of the reinforcing collars by themselves, but I 
added a picture of them installed in the Photos area (PJ Grady Ball 
Joint Reinforcement Collar album).

Rob should chime in on the specifics, but the collars press onto the 
control arms first, then the ball joints are pressed in. 

The collars just "beef-up" the thin flange that holds the ball joint 
in place.

-Brian
VIN# 4494

--- In dmcnews@xxxxxxxxxxxxxxx, "Elvis Nocita" <elvisnocita@...> wrote:
>
> Are there any pictures of that part ?
> 
> I haven't heared or seen any car that has this part installed.
> 
> I am curious, more input please.
> 
> Elvis & 6548...still sleeping










To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive