[DML] Upper door seals
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Upper door seals

I was helping another D owner with a leak in her roof. After removing the 
T-panel and sealing it up (note to POs, duct tape won't seal leaks in the 
long run), we created a new issue. When the doors are opened, the top 
rubber seals catch on the body and wrap around the door. This makes a 
really loud squeaking sound and will probably eventually tear the rubber. 
It does this with and without the T-panel installed.

Has anybody had this happen to them after removing the T-panel? If so, what 
did you do to fix it? We can trim the rubber a bit, but the length wasn't a 
problem before. The only other thing we can think of is putting glue along 
where the foam is along the panel edge. As a quick test we pressed the 
center section of the T-panel down and it still got caught between the 
panel and body.


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive