[DML] Re: Leaking fuel line in Distributor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Leaking fuel line in Distributor

If these are the original lines then this tells you they need 
changing, i would review all of the lines.

remember they are running at 60 lb+ (twice tyre pressure) and after 
25 years......

An easy jobs at least.
is it worth checking the the website for the fuel line kits? 
possible braided?.
always renew the copper washers, and if they are old replace the 
banjo bolts.
Also check the lines to the tank and the accumulator.



--- In dmcnews@xxxxxxxxxxxxxxx, "valleyrat12" <valleyrat12@xxxx> 
> The line the goes from the CPR to the primary pressure regulator 
> started leaking badly. At first I thought it was the primary 
> regulator itself but when I jumped the fuel pump and went back to 
> watch thing I saw the fuel literally gush out of the line (near 
> fitting) So much for my car being "perfectly drivable"
> Could anything I have done caused this? I replaced the o rings in 
> primary pressure regulator recently. Is there any way for this 
line to 
> become over pressurized or do these lines just fail? Please help!
> Nathan
> 2277

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive