Re: [DML] Water pump and internal water pipe removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Water pump and internal water pipe removal



you can also ease the pad away from the frame with a piece of flat 
plastic or ease away and put card between the two.

if still won't come out, try threading plastic packaging straps over 
the whole tank to give you something to pull on.
it should ease out OK.
mine did.

regards

Steve




--- In dmcnews@xxxxxxxxxxxxxxx, Bob Brandys <BobB@xxxx> wrote:
>
> Dave,
> 
> Have you removed the two cooling pipes?
> 
> Try to put a flat piece of 1/8" steel bar along the sides to break 
the 
> bond with the frame.
> 
> Pounding won't work.  You need to get some level in there to start 
> moving it.
> 
> Also, I have found that spraying penetrating oil long the sides 
helps 
> it to slide better.
> 
> Bob
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive