[DML] Re: High Idle Problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: High Idle Problem


This same issue that was posted last week by some one else. Check the replies to his 
postings you may find the answer. I assume you have checked the micro switch correct!  
There is one other thing that can cause this, a stuck ISM, I had a personal experience with 
that. It was on another guys car also.  How I diagnosed it was to swap my known good ISM 
with his unit.  The car idled perfectly, later it was determined that his motor was stuck in 
one position because the upper bearing for the armiture had rusted solid prevening 
movement. although this is more likey to happen on a car that sits for years out in the 


--- In dmcnews@xxxxxxxxxxxxxxx, "Bernie" <bmanderville@xxxx> wrote:
> All,
> I have been working on someones car and it has a really bad high idle 
> problem.  When the car starts, it idles at about 2K RPM.  I have 
> checked all of the vacume lines and they seem to be OK.  What could 
> cause this? 
> Thanks,
> Bernie

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive