[DML] Idle adjustment screw?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Idle adjustment screw?

Ok. Im buring really rich and when i start my car from cold sometimes 
black smoke comes out. It was so bad that last week my car wouldnt 
start because the spark plugs were coated with carbon. Once clean the 
car started right up. So i called john hervey and he says to adjust my 
mixture. But the delema is that i dont have an adjustment screw (allen 
wrench) and the hole it is sussposed to go down is still sealed from 
the factory. Now i was reading a pamphlet that i believe was published 
from the delorean motor center. (its about 10 pages long) about basic 
delorean maintenece and care, plus what to check if the car wont 
start. So on one of the pages it says the idle adjustment screw never 
needs to be adjusted just the idle computer etc that controls 
everything. So im debating whether or not to drill and adjust or to 
replace computer (which is expensive and i dont want to do) any 
opinions/thoughts are appreciated. 

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive