[DML] Re: Speedo cable bracket
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Speedo cable bracket

You could just link up a cresent wrench on the end so that you can 
get a bit more leverage (I used to do this when I worked in a shop 
and getting the impact gun in there was not possible due to the 
sheer size of the gun)

--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@xxxx> 
> The bolts are threaded in the normal direction. Get a bigger 
> PB blaster is not going to help much, they are just torqued very 
> David Teitelbaum
> vin 10757
> --- In dmcnews@xxxxxxxxxxxxxxx, Gus Schlachter <gus@xxxx> wrote:
> >
> > I tried in vain to remove my broken Speedometer Cable Support
> Bracket from 
> > the LF wheel yesterday...the bolts would not budge despite my 
> > efforts.
> >

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive