[DML] Re: tie rod end removal is complete
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: tie rod end removal is complete



I got the tie rod ends off after Mike Clemens told me that they are 
left hand and right hand thread, I didn't know that so I was 
thightening them when I thought I was loosening them. Now I am putting 
the sway bar back on and clean the fuel system, again, and I'll be on 
the road within a few weeks. I'm shooting for the 29th.

Josh
10989

--- In dmcnews@xxxxxxxxxxxxxxx, "Josh Porter" <joshp1986@xxxx> wrote:
>
> I am trying to replace both tie rod ends but can not or don't know 
how 
> to get them off. I thought I knew but they are being very honory. 
any 
> ideas on how to get those suckers off? I sprayed PB blaster on them 
> and let them soak for a few minutes and put a pair of vice grips on 
> the old end and used a wrench on the nut but it didn't move. I tried 
> the vise versa but the same result. My guess is that it is stuck on 
> there due to it being 23 years old and I am a weakling, but that's 
> just me.:)
> 
> Josh
> 10989
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 






Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive