[DML] Re: Fuel Air Mixture

["David Teitelbaum" <jtrealty@xxxxxxxxxxxxx>]

My guess is your Lambda is dead so the PO turned up the mixture and
fiddled with the brass screws to get it to run. See if the frequency
valve on the right hand valve cover is buzzing. If it is not you have
to get it running before you can begin to adjust the mixture. You
could also have "issues" with some of the other systems like the idle
motor. You will have to check them out, one-by-one. As you go along
you have to find and fix any vacuum leaks.
David Teitelbaum
vin 10757 



--- In dmcnews@xxxxxxxxxxxxxxx, "Bernie" <bmanderville@xxxx> wrote:
>
> All,
> 
> I have replaced the valve cover on VIN 4045, and started her up 
> today, the loud ticking noise is still there (sounds like bottom end 
> problems), but that is not the subject of this email.
> 
> I noticed while working in there that the brass idle mixture screws 
> were loose, on the intake, so based on everything I have read I hand 
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/