[DML] Timing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Timing



I just completed a major tune-up and performance upgrade on 6859. I added John Hervey's kit with the Bosch platinum + 4 plugs, 8 mm wires, MSD Blaster + 2 coil and high performance resistor.  I know the timing can be adjusted plus or minus 2 degrees.  Does adjusting it at a certain point within that range yield better performance.  If so, does it vary with grade of gas? I am currently right at 13 degrees and haven't had the time to play with timing (plus I am not in the mood to stick my hand in a hot engine to play with the adjustment). Just getting the timing to 13 degrees has resulted in me burning the finger prints off of my hands.

Nate






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated