[DML] Wiring in some extra juice
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Wiring in some extra juice

I'm adding some electronics to my rear wall, beneath my window
(powered subs, etc... about 90 Watts...  probably less than 10 Amps). 
I was planning to run some 8 AWG wire (should be overkill / future
proof) from my battery's top post to this area, but I just found out
the entire battery area is enclosed in plastic and fiberglass... 
pretty well sealed.  I also noticed a huge cluster of brown wires
(constant 12V, I suspect) in the passenger side alcove behind that

What have other owners done to add some juice for any back wall
electronics?  Drill through the battery compartment, attach to the
brown wire cluster, or other?  I'd appreciate any recommendations.


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive