[DML] Re: Bleeding cooling system
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Bleeding cooling system


You need to open up the bleed valve on the waterpump, you can't miss it 
its right there on the top of the pump.  You may also want to hit the 
upper small hose on the right side of the car, just loosen it 
and "burp" it until coolant comes out.  You should be fine after doing 


--- In dmcnews@xxxxxxxxxxxxxxx, "Daniel" <dmcburn75@xxxx> wrote:
> I need to bleed my cooling system this weekend and I was wondering if 
> anyone has instructions on how to do this? Warren at DMC gave me a 
> method called the burp method. Essentially filling the heder bottle 
> within 3inches of the top, bring the car to 220F and if the fans dont 
> come on shut the car off. Let the car cool and then remove the cap to 
> the header botttle and repeat. I was told after 2-3 of these cycles 
> the air should be bleed from the system. Does anyone have experience 
> with this method? Or perhaps have another method to share. Thanks in 
> advance.
> Danny
> 4160

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive