Re: [DML] HELP - Can't get car running after maintenance!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] HELP - Can't get car running after maintenance!



Thanks for the advice everyone, but I found my mistake,

That brass pipe with the angled end that slips into the bottom of 
the venturi assembly slipped out.  I reinserted and it worked fine.

Thanks again,

Paul

--- In dmcnews@xxxxxxxxxxxxxxx, Jonathan Minor <malletslinger@xxxx> 
wrote:
> Pop the cap off and make shure none of the metal pins
> that make contack with the rotor are twisted/turned
> slightly.(Sometimes when caps are made, the metal pins
> slip before they are secure in the plastic that makes
> the cap.) Also, it is possible that one or more of
> your new wires are faulty. Does some one on this list
> know how to check for that?
> Hope this helps.
> 
> --- sweetp01569 <paul.sweet@xxxx> wrote:
> 
> > Hello everyone,
> > 
> > I just finished changing my water pump, hoses,
> > Valley of Death clean-
> > up, spark plugs, wires, cap, rotor.  When I tried to
> > start the car 
> > this morning, it turned over, started briefly for a
> > couple of 
> > seconds, revved to around 1100 rpms, then quickly
> > died!  On another 
> > attempt, I tried playing with the gas pedal to keep
> > it running when 
> > it started.  I managed a few more seconds, but
> > nothing steady.  As 
> > soon as my foot releases the pedal, it dies.
> > 
> > I believed I was very thorough with the spark plug
> > and cap wire 
> > order, fuel line assembly, etc.  Could I have
> > knocked some idle 
> > adjustment out of whack when I removed the throttle
> > cable spool?  
> > Where should I start to get the car running again? 
> > 
> > Before I did this work, the car purred like a
> > kitten, but wanted to 
> > change plugs, wires, and water pump for preventative
> > maintenance.  I 
> > didn't know how old the plugs and wires were.
> > 
> > Any advice would be appreciated.
> > 
> > Thanks,
> > 
> > Paul
> > Vin 10944






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated