Re: [DML] Rough running
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Rough running



You are right on.  I found leaks around the intake manifold, around the 
O-rings.  I am on the hunt now for some new bolts to tighten the intake 
manifold down to the engine block.

Thanks for the input.

Lingo #2034

----- Original Message ----- 
From: "Joseph Kuchan" <josephkuchan@xxxxxxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Sunday, August 28, 2005 5:21 PM
Subject: RE: [DML] Rough running


>
>
> I have no vacum leaks on the engine (new lines all the
>>way around).
>
> You're probably right about this but don't assume that simply because all
> the parts are new that there are no vacuum leaks. I would confirm this by
> hooking up a vacuum gauge. You should see at least 18" at idle and a lot 
> of
> PRVs pull 22".






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive