RE: [DML] Re: AC system compressor doesn't cycle, high discharge pressur
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Re: AC system compressor doesn't cycle, high discharge pressure

What is the website you were using as a reference?
- VB

>From: "Marty Galbreath" <marty@xxxxxxxxxxxxxxxxx>
>Reply-To: dmcnews@xxxxxxxxxxxxxxx
>To: dmcnews@xxxxxxxxxxxxxxx
>Subject: [DML] Re: AC system compressor doesn't cycle, high discharge 
>Date: Fri, 12 Aug 2005 12:33:30 -0000
>Last night I did some more work and proved beyond a doubt that my
>compressor is indeed shot. Using procedures I gleaned from
>Sanden's website, I saw that the pressure between the high and
>low side would equalize in only 20 seconds after being turned off.
>The spec is at least 2 minutes. I then recovered enough Freon so
>that the compressor would cycle normally, 7 sec on, 9 sec off. I
>went on a test drive and everything worked well for about 5 minutes,
>then quit. Returning home and connecting my gauges, I saw that the
>pressure in both the high and low sides was 80 psi. I believe the
>compressor is toasted. I'll update after I install a new one.
>Many thank to all who have replied!
[moderator snip]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive