[DML] Rear Louvers hitting stainless T-Panel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Rear Louvers hitting stainless T-Panel



Hmm, my search didn't return any previous posts, so lets start a new one
:-)

I just realized that my rear louvers after much opening / closing are
rubbing the back T-Panel.  It also appears the back T-Panel is now
slightly bent under on the rear left side.  

Now I have loosened the bolts (and removed the struts) to adjust the
louvers.  If I move the Louvers to far back then they wont lock any
more.  This is really a tight fit to not hit the rear T-Panel, and still
get it to lock.  

Any suggestions for getting this to fit just right?  Or should I keep
pushing till it fits :-)  





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive