RE: [DML] Mixture Control Unit

["Joseph Kuchan" <josephkuchan@xxxxxxxxxxx>]

It is a stop for the air sensor plate that is positioned to allow for a 
little "overshoot" of the sensor plate. If your car were to backfire 
(through the intake) this stop would be as far as the plate would be able to 
swing.

-Joe Kuchan

>From: "stainlessilusion" <5n-@xxxxxxx>
>Reply-To: dmcnews@xxxxxxxxxxxxxxx
>To: dmcnews@xxxxxxxxxxxxxxx
>Subject: [DML] Mixture Control Unit
>Date: Mon, 08 Aug 2005 04:40:10 -0000
>
>Just curious... Over the center of the metering plate-there's that bar
>with the black plastic piece in the center (it goes right over the
>bolt in the meter plate)-what purpose does this piece serve? -----Dani
>B. #5003
>
>
>
>
>
>
>To address comments privately to the moderating team, please address:
>moderators@xxxxxxxxxxx
>
>For more info on the list, tech articles, cars for sale see www.dmcnews.com
>
>To search the archives or view files, log in at 
>http://groups.yahoo.com/group/dmcnews
>Yahoo! Groups Links
>
>
>
>
>
>







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/