[DML] Re: Window Tracks
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Window Tracks

You should loosen and adjust the guides with the window motor detached 
to get a good alignment. A good alignment and you can push the window 
open and closed by hand. I did some bending on mine but it was to 
correct what I think was bending caused by poor alignment somewhere in 
the cars life.

Harold McElraft - 3354 

--- In dmcnews@xxxxxxxxxxxxxxx, "sweetp01569" <paul.sweet@xxxx> wrote:
> I recently repaired the plastic guides on my driver's side window 
> the large washer fix.  It now stays on the guide, but the window 
> to be too far back to line up properly to close all the way without 
> jamming against the rear part of the opening.  Can the metal tracks 
> gently bent to the make sure the window lines up with the opening as 
> it closes?  
> Thanks,
> Paul

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive