[DML] Mode switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Mode switch

I have to agree with Dave.  Never use Vasolene or other lubricants on seals or other rubber parts. I had a problem with my mode switch for a couple of years until all it did was whistle. I finally took the time to check it out (I believe in May of 2000) and took it all apart. 
So what do you use on vacuum parts, dah, try high vacuum grease. Put just a little coating on the rubber part and it will work again.  I haven't had any problems with since.  Still the original part.  All functions work great with lots of air thru all dash and door openings.
Vic 7012

Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 

[Non-text portions of this message have been removed]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive