Re: [DML] Needed Badly: Button Clip for the Mode Switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Needed Badly: Button Clip for the Mode Switch

Well I already have three of Grady's HCR mode switch diaphrams that 
are pre lubed/oiled. I'm redoing the mode switches on all three 
cars, all are original.

I used petroleum jelly on them before, but it still likes to dry out 
after awhile, or the jelly will block off a vent setting, and I hate 
tearing the console apart for that damn mode switch. So I decided to 
do it right with three of the better mode switch diaphrams.

The mode switch in 16851 is being replaced just to make sure it 
isn't a factor in my problem with the vent controls. Other two for 
preventative maintenance. I have two spare mode switches, just that 
the switch in 16851 and my spares all have the damn button clip 
broken, missing 1 tab. Seems the P.O. of these clips forced them in 
the wrong way.

The other two cars are fine, and I told myself I would never rob 
from another car to make another one work, so I am still holding 
myself to that one. I'd rather just buy the correct part and have it 
done the right way.

So, if anyone still has a spare button clip, I would desperatley 
like to buy it from you!!

-Joe O'Brien


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive