[DML] Idle Speed Motor / Cooling
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Idle Speed Motor / Cooling

I have been messing with my idle speed motor, trying to figure out the loose 
and I found that the car idles, and runs better when I simply unplug the 
damn thing!
So, I don't know what to do, but when I unplug it the idle drops to a nice 
When I plug it in it rises, when I pull on the wires it drops again?

We had replaced the thermostat and I can not say for sure one way or the 
other that
it changed anything.
I took the car out yesterday for a test drive to see if it would overheat.
The temp stays around the first marker until I turn on the AC and then it 
doubles, the temp needle stayed just below the halway mark, about 210 
and at time reached the center of 220.
Is this normal and acceptable?
Will it harm the engine?

- VB

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive