Re: [DML] My DMC Joe Experience
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] My DMC Joe Experience



It's kind of funny that this just came up.  

After seeing the original post I decided to run through the huge 
list of reciepts etc the PO provided to me when I bought my project 
car from him.  To my amazement, there is quite a list of work/parts 
done by DMC Joe.    

It appears that 3 or so pages worth of items were bought including 
lots of labor etc on the car.  As I've been rebuilding the car, it's 
hard to see all of it was done but since it was sitting outside for 
a year or so, it's a bit hard to tell.  I did get to check out my 
auto trans governor (listed as replaced with a new one from 
apparently one of the vendors) and gladly it looks brand new.  From 
most of the upgrades listed on the page, they seem to be there.  One 
thing I can't get passed is that DMC Joe installed around 4k of 
upgrades etc, and 3k in labor but never thought to install the front 
end safety recall brackets.  

I'm going to be running my last little test to see if the items are 
there.  On my list of receipts, it was said that both window motors 
were replaced in 2001.  The PO paid $495 for the pair, so I'm hoping 
they're the Heavy Duty Replacements from PJ Grady.  I'll be checking 
this coming week and will let everyone know.

One quick question to everyone, has anyone had they're dash & 
binnacle recovered around the year 2000 or 2001?  Possibly by DMC 
Joe or someone he knew?  I'm wondering because I really like the 
stitching done to my dash & binnacle, I think it looks cool.  There 
is only one problem!!!  The grain is completely different than any 
of the other pieces!  It has this small thin grain with varying 
crosshatch type grain marks is various places.  It's not really bad 
but I thought I'd ask if anyone else has had this experience.  I 
just figured they'd use the original type grain to match the rest.  
one thing that drives me nuts, they restore the interior but allow 
the passenger kneepad to burn up and crack! Local vinyl shop wants 
$150 to upholster it with new crap vinyl LOL, this is when you call 
up DMCH!!! I would like to say all the vendors have been very 
supportive in my restoration, much thanks to all!

And in reference to DMC Joe, I never personally dealt with him but 
the Tankzilla listed as being installed WAS installed & so far I 
haven't seen anything that looks to be standing out (still anxious 
to see if the motors are there).  It's a shame when stuff goes that 
bad, hope everything comes out well.

Thanks,

Brandon
Vin 3323






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive