[DML] Tachometer Failure
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Tachometer Failure



Hey everyone. A few months back I purchased my first DeLorean.  
Everything works great except for the Tach.  When I put the key in, the 
tach will fall to 0, I start the car and the tach stays still. If I rev 
the engine, nothing happens.  The needle stays stationary.  When I turn 
the car off, it'll jump to 2000 or so (common from what I've seen).  
The only time the tach wakes up is when I'm at around 3000 rpm (I'm 
guessing here) and the tach will run to the redline.  When I shift, the 
tach goes back to 0 until I get back to around 3000 rpm or so.  

Any thoughts?  Time for a new tach?  

Thanks
Ja






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated