[DML] Re: Sealing transmission
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Sealing transmission

I'd strongly recommend Permatex Anerobic Gasket Maker rather than 
Hylomar for the non-gasketed surface. I've rebuilt several 
transmissions now and the only leaky one was sealed with Hylomar (based 
on some erroneous advice). I use a spray sealer (Permatex Aerosol) on 
the paper gaskets although the factory left them dry. No runs, no 
drips, no errors......

Dave Swingle

--- In dmcnews@xxxxxxxxxxxxxxx, "stainlessilusion" <5n-@xxxx> wrote:
> Guys if you've read my previous posts you know I had big problems 
> my manual transmission. I'm in the process of putting it back 
> but need to know: Should I put any hylomar sealant on the paper 
> gaskets? 

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive