Re: [DML] Steerig rack side-to-side movement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Steerig rack side-to-side movement

There's a plate under the square steering rack mounting bracket (no 9 in 
image) It has two prongs on it and it's possible to install the rack 
without slotting the semicircular flange into these prongs. This will 
allow the rack to move from side to side


Jeff Phillips wrote:

>The service manual talks about removing the lateral restraint bracket
>under the RH support bushing. I can't find a picture of this bracket
>in the parts manual.  My rack is sliding left and right as much as a
>1/4" when I turn the steering wheel.  Whats the best way of going
>about correcting this?

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive