[DML] Door Alignment Issues
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Door Alignment Issues


I'm in the process of aligning my striker pins so the doors close easier without as much "clunking".  So far I have adjusted the drivers side well, I can close the door with one finger and it latches front and back and locks fine.  The passenger side is a slightly different story however, I have been adjusting the pins and cannot seem to get it to close as well as the drivers side.  It will close but takes some more force and you can definitely feel the pins bumping the door as it closes.  I have tried removing one pin so I only have to align one at a time, but the pins just will not move far enough for a proper alignment.  Does it sound like I have to adjust my hinges?  That seems like it would have a huge impact on the way the way the door closes so I have held off on that.  Let me know what you think.

Todd Nelson
1561, Vermont

[Non-text portions of this message have been removed]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive