Re: [DML] Stainless Exhaust
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Stainless Exhaust


I put the UK exhaust on 3441 last year (just in time for Pigeon Forge)
and all I can say is that it is a magnificent piece of workmanship

a bit pricey with the current exchange rate, took months for them to
get it built, but definitely worth the wait

it bolted up perfectly (I used 4 studs on each port rather than 2 as
with the original manifolds) - nice the way it eliminates the front
crossover pipe

unfortunately I did not do before/after dyno runs, but it feels very
snappy, and gives the PRV a whole different sound - a lot more throaty


3441 (DCS 2004 "Best Exhaust")
3307 (gonna need a LOT of work)
6147 (EFI conversion)

On Tue, 28 Jun 2005 21:18:23 -0000, you wrote:

>When I get my car, I would very much like to replace the stock exhaust
>with a stainless one. I have emailed "Stainless Exhaust Specialist" at
>, but I also thought I heard about a stainless
>exhaust carried and/or made by DMC Houston. I have looked all over
>their website for it and cannot find a mention of it anywhere. Does
>anyone know if they are still made, and how I could get one? Also, if
>any of you have either of these installed, could you tell me the pros
>and cons of that system so I can compare the two. And if anyone knows
>of another performance exhaust made for the DeLorean please let me
>know! Thank you!!
>Freddie Wise

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive