Re: [DML] Re: Otterstat (WAS Shade Tree Mechanic )
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: Otterstat (WAS Shade Tree Mechanic )



If your otterstat is facing upwards, you should loosen the hose clamps
and rotate the pipe so the otterstat faces down.  This will keep 
the switch covered with coolant, and help keep your fan turn-on
accurate.
--
Mike


-------------- Original message from "Toby Peterson" <tobyp@xxxxxxxxxxxx>: -------------- 


> Robert - The otterstat is located in a coolant pipe on the drivers 
> side of the engine, just forward of the catalytic converter. It has 
> two wires connected to it, and is either pointed up or down, 
> depending on the VIN. It is held in place with a little spring 
> clip. 

[Non-text portions of this message have been removed]





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated