[DML] Re: Need advice on frame problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Need advice on frame problem



Before spending all the money on shipping and work-just pull the tank 
and see just how bad it really is. If you can clean up the fluid, 
prep the area and spray it with POR-15 you'll be all set. Get rid of 
the MC so it doesn't keep leaking all over the frame. -----Dani B. 
#5003




--- In dmcnews@xxxxxxxxxxxxxxx, "Matt Spittle" <supermatty@xxxx> 
wrote:
> I was in the process of replacing my cooling hoses from the front to
> the rear of the car, and when I removed the fuel tank cover plate, I
> noticed that the epoxy on the top of it was practically falling 
off. 
> Not only that, but so was the epoxy on the frame that was in that
> section.  I was disgusted, because the frame at this place was fine
> the last time I removed this cover plate a little over a year ago. 
> Between then and now, I've driven the car about 10 miles.  
> 
> I looked around for the source.  It definitely smells like brake or
> clutch fluid.  The clutch master cylinder looks pretty good (I can
> still see the original plating intact and such), but the brake 
master
> cylinder looks like hell.  Completely rusted and actually, it 
looked a
> little damp.  I figure it must have leaked.  Checking the fluid 
level,
> the reservoir looks about half-full.  I know when I last bled the
> brakes that I filled it more than that.  
> 
> My real problem here is that it seems like I won't be able to get at
> all of the areas that the epoxy has melted off.  At least, not 
without
> pulling out the fuel tank.
> 
> What should I do here?  Separate the body from the frame?  Drop the
> fuel tank?  I would consider sending it to DWC (Rich W's business) 
or
> PJ Grady, etc, but I'm in the middle of my eagle premier swap, and 
it
> doesn't run yet.  I'm not sure who ships cars like that.  I know 
that
> Passport Transport won't unless the vehicle is driveable.  
> 
> If anyone could offer any other perspectives or thoughts, I'd
> appreciate it.
> 
> Matt
> #1604








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated