[DML] Re: Almost fixed

["painterdave72" <painterdave72@xxxxxxxxx>]

--- Hey Dave i do have new seals on alll injecors.. the mechanic said that 
when he did the leak test he did around the base of the support and he could 
see it suck some of the oil into the head there.. they shouldnt be that hard to 
do i hope... dont know... also another question I just had my ac charged ... 
should the compressor run all the time?? cause it doesnt seem to shut off and 
the fans are always on??? Thanks Dave..vin 15275




In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@xxxx> wrote:
>  I would doubt the support itself is leaking much. It is much more
> likely that you need to replace the injector seals. You remove the
> injector and slide off the old seal, slide the new one on and replace
> the injector. When the seals get old they get hard and shrink and
> don't seal well. You will see the new seals will fit tightly when you
> replace the injector, the old ones don't fit tightly anymore. Some
> seals sold by some venders fit loosely. You can wrap teflon tape on
> the seal and it will fit better. In fact you can try this trick on the
> old seals and they will work better (and it's cheaper).
> David Teitelbaum
> vin 10757
> 
> 
> 
> -- In dmcnews@xxxxxxxxxxxxxxx, "painterdave72" <painterdave72@xxxx> 
wrote:
> > Hey all just got my car back from having the ac charged and leak
> tested for 
> > the summer... also had the mechanic do a final vacumn leak check and
> the 
> >







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/