Re: [DML] Re: Upper door seals
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: Upper door seals



A tip for removing the seals out is to use WD-40 to lubricate the seals
where they pass behind the hinges.  This makes it much easier to slide
the seals in and out without bending them and to get them aligned with
the rivit holes.

--
Mike


-------------- Original message from stefan diklich <stefandmc@xxxxxxxx>: -------------- 


> I got it in and out without removing the T panel, mind you it was quite 
> difficult and took all day, now its in and looks fine. I used SS rivits too. 
> 

[Non-text portions of this message have been removed]






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated