[DML] Trans noise
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Trans noise





Hey all I jsut got finished with the clutch install in my car and started it up and 
it is making this rubbing noise... was really loud for a minute then quited up 
some when i let the car run for a few minutes.. I dont have the bottom or side 
sheilds back on yet so they cant be rubbing.. maybe the starter shield?? or its 
it possible the cable was slightyl misadjusted when i loosed it and took it off?? 
also the clutdch still needs to be bled a little cause it is a little soft from putting 
a new slave cylinder on...It seems to go into gears fine though i didnt drive it 
just moved it in the driveway alittle.. reverse works fine... I really dont feel like 
pulling it out again... any help is appreciated.. Dave..vin 15275..








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated