[DML] Re: Source of My misfire and other problems
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Source of My misfire and other problems

Go to D:04:15 in the Workshop Manual. Test the Lambda with  5B, C, D,
and E. You may be on the wrong scale so try others so you get similar
readings. If the Lambda ECU can output these values then you can guess
the O2 sensor is contaminated. To achieve a smooth idle you cannot
have ANY vacuum leaks and all the cylinders MUST be balanced very closely.
David Teitelbaum
vin 10757

--- In dmcnews@xxxxxxxxxxxxxxx, Phil Priestley <phil@xxxx> wrote:
> I unplugged the WOT switch just to test if it was that. Didn't make a 
> difference. What I remember from a couple months ago when I had a 
> grounded circuit on the WOT/ temp probe circuit is that when you hook a 
> dwell meter up it will hold steady at about 55 degrees or so. This is 

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive