RE: [DML] VIN: 2953 Doors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] VIN: 2953 Doors




Just to make sure you didn't get a bad strut, did you swap out with the
other one to confirm it isn't bad before you adjust.
John Hervey
www.specialtauto.com

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On Behalf
Of rodney rael
Sent: Monday, April 18, 2005 9:15 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] VIN: 2953 Doors

Conundrum:

I had same problem.   It is your torsion bars, and it was discussed at
length like one month ago.   Go to Google.com and do an advanced
search picking only DMC news and put torsion bar.

Good luck!..

Rodney
3300

On 4/18/05, conundrum1984 <vin02953@xxxxxxxxxxxx> wrote:
>
>
> I just placed new gas strust on my doors that I purchased from DMC
> Houston.  They work fine and hold up "ok" when I push the door all the
> way up.  The driver's door goes most of the way up then I got to push
> it a little to go the rest of the way.  








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated