Re: [DML] Can't get door open
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Can't get door open





Same exact thing. The bellcrank isn't returning to it's original
position, because of the door latch cable. If you've got the upper
trim panel off, take a look at how the linkage works, and you'll see it.

And if you've got the upper trim panel off, I'd reccomend lubricating
the linkage. White Lithium Grease in a spray can works wonders. Sprays
out like water to get into the hard to reach places (like the cable
housing), but will thicken up into grease within a few seconds.

DMC Joe had written a long time ago that his fix for this was to
disconnect the locking rod from the front latch. And yes, while
that'll work, it doesn't really fix the root issue here. And it's far
simpler to lube, and adjust the one cable, then it is to have to tear
into the rods and mechanisms.

-Robert
vin 6585 "X"



--- In dmcnews@xxxxxxxxxxxxxxx, "content22207" <brobertson@xxxx> wrote:
> 
> 
> I've got the exact opposit problem -- if I unlock my driver door with
> the key cylinder only, the cam does not move far enough and one of the
> Nader bolts will hang the next time it is closed. Everything's cool if
> I remember to shove the cam just a tad further with the interior
> release lever before I close the door, but I lock it so rarely that I
> never remember to do that. Then I end up reaching across from the
> other side, popping the trim panel off, and activating the linkages
> manually as everyone has said.
> 
> Bill Robertson
> #5939
> 
> >--- In dmcnews@xxxxxxxxxxxxxxx, "trekkerlb@xxxx" <TrekkerLB@xxxx>
wrote:
> > 
> > 
> > This has happened to me - I can't say I've fixed it, but I opened it
> up by carefully locking it with the key and unlocking.  I can't say
> I've noticed it get any worse.  It happens to me when I lock the car
> from the inside.  I've been meaning to look and see if anyone has had
> this or could give some insight.
> > 
> > I hope this atleast opens the door!
> > Luis 
> > 3723








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated