RE: [DML] Fw: door lift cylinders

[Soma576@xxxxxxx]

<<<If anyone is interested, I can make a video showing how the doors open with 
these
shocks and you can tell me if it is normal or not.

- VB>>>>>

VideoBob,

Are you sure your torsion bars aren't overtightened a notch or two?  If you remove the piston from the door and let the door hang, it should only have a couple inches of space from being closed.  If you have much more than that, the bars are too tight.  It's likely a previous owner may have cranked them up one because the struts were about dead and this way they opened better!

Andy





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/