[DML] Cold Start Valve - how long does it go?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Cold Start Valve - how long does it go?





How long is the Cold Start valve supposed to shoot fuel?  Is it a
second, or something more like 15 seconds?

My PO installed a momentary button to activate the Cold Start valve,
but I think they were doing so to compensate for another warm-up
problem... not because the activation based on the thermo-time switch
was deficient...  As it stands, in order to cold start, I have to
manually tap this button periodically during the first 10-20 seconds
after start-up, otherwise it dies.  If I attach the original
electrical connector to the cold start valve, the engine still starts,
but sputters out within a few seconds.  Is there a way to test if this
is the warm up regulator or something?

Thanks,
--Greg
#2894








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated