Re: [DML] High Idle

[JDub <doki_pen@xxxxxxxxx>]

So the saga continues....

Today I tried blocking off those springy deceleration
things and the car idled perfect.  Does this mean they
are the culprit?

Jon

--- JDub <doki_pen@xxxxxxxxx> wrote:

> 
> 
> Bill,
>      In response to your e-mail so everybody's on
> the
> same page:
> 
> > Are you sure the big O rings on your U pipes are
> the
> > right size, and
> > in good condition? 
> 
> The O-rings definately are not leaking I checked
> that.
>  
> 
> > The nipple you were blowing through is ported
> > vacuum.
> 
> Of course, I said I was pumping 5psi air in to the
> vacuum port.
> 
> > If you sprayed
> > soapy water on the
> > upstream side (towards the air sensor plate) of
> > course you'd see bubbles.
> 
> I was spraying the bubbly water on to the other side
> of the butterflies.  The soapy water confirmed that
> air is getting by the throttle shaft where it passes
> through the throttle body.
> 

<snip -- excessive quoted material trimmed>






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/