RE: [DML] Questions Re: B280 .... Im so confused.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Questions Re: B280 .... Im so confused.




Steve,

The link that I sent Bill is of the Chrysler 3.0 V-6 not the B-280.

DMC Joe 

-----Original Message-----
From: Steve Stankiewicz [mailto:protodelorean@xxxxxxxxx] 
Sent: Saturday, January 15, 2005 5:40 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: RE: [DML] Questions Re: B280 .... Im so confused.



Joe, based on the pics, that doesn't seem to be a PRV6, but rather some
other Chrysler (Mitsubishi?) V6.

Steve
--- DMC Joe <dmcjoe@xxxxxxx> wrote:

> 
> 
> Bill and Alex,
> 
> Bill first,
> 
>  I was bale to locate some information
>
http://robskorner.org/faqs/3litrefaqs/3litrefaqs.html
> that may be useful to
> you concerning the Chrysler intake manifold. I just looked at by B280 
> and one of the problems the I see with a carb modification is height. 
> The flat sections at the top of the B280 are only about 2"
> wide, not wide enough for
> carb mounting. You could maintain the Chrysler upper plenum but by the 
> time your finished mounting a carb and fresh air intake you would be 
> well above the engine cover. You could cut a hole in the cover or 
> completely remove it.
> With that set up you would be able to watch your carbs at work while 
> your driving, through your rear view mirror.
> 
> If you need more details on the B280 let me know, I have one in my 
> garage.
> 
> 
> To Alex,
> 
> You asked: "And are intake manifolds difficult to get"?
> 
> No, they are readily available. Bill is looking for B280 intake 
> manifolds which are very hard to find.
> 
> You also asked: "Is the PRV6 a good engine or not?"
> The PRV 6 is an excellent engine. I believe Bill is just looking for 
> an alternative fuel delivery system.
> 
> DMC Joe
> 
> -----Original Message-----
> From: alex morgan [mailto:mauibarber@xxxxxxxxxxx]
> Sent: Saturday, January 15, 2005 2:35 AM
> To: dmcnews@xxxxxxxxxxxxxxx
> Subject: RE: [DML] Questions Re: B280 .... Im so confused.
> 
> 
> 
> Ok, I'm confused.  Is the PRV6 a good engine or not?
>  And are intake
> manifolds difficult to get?  I searched the archives
> and could not find very
> many engine complaint stories. I would think an
> intake manifold would be a
> readily available part or a part that wouldnt be
> that difficult to tool.  
> Can anybody clear this up?
> Alex
> 
> >From: "content22207" <brobertson@xxxxxxxxxxxx>
> >Reply-To: dmcnews@xxxxxxxxxxxxxxx
> >To: dmcnews@xxxxxxxxxxxxxxx
> >Subject: [DML] Questions Re: B280 / Chrysler 3.0
> Intake Manifolds
> >Date: Sat, 15 Jan 2005 04:45:49 -0000
> >
> >
> >
> >
> >In lieu of hard to find Volvo A series intake
> manifolds:
> >
> >I studied a B280 in a junkyard once. Intake
> manifold seemed modifiable 
> >as follows:
> >- plug injector ports
> >- seal a plate across the rear
> >- plane a flat surface above central air passage
> >- drill some venturi and stud holes
> >
> >Does anyone know if Chrysler 3.0 intake manifolds
> are identical to 
> >B280? If so, could someone with a Chrysler model
> verify that it is 
> >indeed modifiable as above? Valley width is
> identical to B28, and 
> >mounting holes are in the same location, so it
> should bolt up OK. I 
> >believe ports are different sizes, but as long as
> they are not larger 
> >than B28 O rings that shouldn't be a problem.
> >
> >This could be a source of intake manifolds for
> owners wanting to 
> >experiment with carburetion.
> >
> >Bill Robertson
> >#5939
> >
> >
> 
> 
> 
> 
> 
> 
> To address comments privately to the moderating
> team, please address:
> moderators@xxxxxxxxxxx
> 
> For more info on the list, tech articles, cars for
> sale see www.dmcnews.com
> 
> To search the archives or view files, log in at
> http://groups.yahoo.com/group/dmcnews 
> Yahoo! Groups Links
> 
> 
>     dmcnews-unsubscribe@xxxxxxxxxxxxxxx
> 
>  
> 
> 
> 
> 






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated