Re: Protection Cap Armrest Extension?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Protection Cap Armrest Extension?



I have a related question. Are all cars able to "accept" these
armrest extensions? I have an early 81 (#1604) and the passenger side
has a cap on it, but it looks like it would be difficult to fit one on
the driver-side with the way the piece is shaped. 

Matt
#1604

--- In dmcnews@xxxxxxxxxxxxxxx, "videobob11" <videobob@xxxx> wrote:
> I was reading through the "Delorean One Service and Technical
> Bulletins" book, and bulletin # ST-14-9/81 shows "Service Action
> SA-0005" for the placement of a "protection Cap Armrest Extension" to
> be added.
> This is a cool little plastic cap to cover that peice on the 
> side of the wall near the seat that always gets ripped from getting
> in and out of the car.
> Almost every single D I have seen has a tear, or at least excessive
> wear in that spot.
> This plastic cap is supposed to glue on that spot.
> 
> Does anyone know where I can get these?
> They are not listed as a part on DMCH's website.
> If anyone knows where you can get them let me know!
> - Videobob






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated