Correction: [DML] Re: hard starting when cold? Message #35889
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Correction: [DML] Re: hard starting when cold? Message #35889



Expected someone to catch this. Thought about it later myself but
"send" button already pressed...

To test cold start valve simply swap electrical plug with warm up
regulator (which you already know is electrically OK). A lot easier
than running wires to jump start post and block. Apologies.

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, "content22207" <brobertson@xxxx> wrote:
>
> Just run 12v into valve from jump start post and ground to the block.
> If valve pumps, know you've got a bad thermal time switch (or wiring
> to it bad).
> 







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated