[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


John, I know this is late, but fuel lines very seldom stop up. They are not
rubber. The injector has a filter in it that I can normally clean out with
the heated ultrasonic cleaner and the output port on the fuel distributor
has a filter basket in it also that can be cleaned or taken out. A vacuum
leak can cause the high idle or the idle speed sensor.
John Hervey

-----Original Message-----
From: John Podlewski [mailto:john_podlewski@xxxx]
Sent: Friday, September 19, 2003 5:40 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] HIGH IDLE

> Got my Delorean running today, mechanic says it was a
> bad acumulator and a clogged fuel line to the injector.
> However, it idles high says there now is another clogged
> rubber fuel hose(the one that goes to an injector to the
> fuel distributor). Don't know if he knows what he is
> doing, but he did get it running? But he says that is
> what is causing it to idle so high around 2000 rpm's
> is he right or just wasting time and ofcoase $$$$?

Home Back to the Home of PROJECT VIXEN 

Copyright © 2018  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive