Re: [DML] Re: Alternatives for Angle Drive needed, getting fed up with system

["DMC Joe" <dmcjoe@xxxx>]

Steve is absolutely correct. The Hardcore Angle Drive available from both my
web site and PJ Grady's is the answer to the angle drive blues. We have sold
and installed these improved units since there introduction and have had no
failures.

Regards,
DMC Joe/Help Club dmchelp@xxxx
Information & Store http://shopping.oraclesmallbusiness.com/dsvstore
DeLorean Website Directory www.dmc.tv


----- Original Message -----
From: "dmcman82" <srubano@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Sunday, March 31, 2002 9:37 AM
Subject: [DML] Re: Alternatives for Angle Drive needed, getting fed up with
system


> Rob at PJ Grady has designed and sells "hardcore" angle drives.
> Basically replacing all the plastic soft gears inside the angle
> drives with stainless steel gears and added some newer slicker lube.
>
> here is what's stated on his site:
> Hardened Type 416 Stainless Gear Set
> Removable Double Square Drive Cable
> Synthetic Assembly Lubricant with "three times the shear strength"
> of molybdenum grease
> Three Year Unlimited Mileage Warranty
>
> http://www.pjgrady.com/lgspec.asp?id=20
>
> Steve
>
> --- In dmcnews@xxxx, "janvdwouw" <jvdwouw@xxxx> wrote:
> > Hello everyone,
> >
> > Does anyone here have or know of a suitable replacement
> > for the speedo drive system?
> > In the past year or so it has failed on me 3 times and frankly
> > I am getting pretty fed up with this stupid little system taking
> > up resources I had reserved for other repairs.
> > Untill now I have spent allmost over $500,- on parts and
> > repairs of this speedo drive effectively replacing allmost
> > the entire system below the Lambda-counter TWICE.
>
> [moderator snip]